Follow our Step by step guides
You’ll find all the steps needed to setup your IPTV subscription! If you need any help contact us on WhatsApp or Telegram.
You can download Set IPTV from your TV store on Samsung, LG, …
After installation, open Set IPTV then you will find MAC address on screen
Navigate to SET IPTV web portal
Open the set IPTV upload page via browser : https://cms.manage-setiptv.com/set.app and Choose Playlist link method :
1-Enter Mac address
Enter your Set IPTV mac address in TV MAC field
2-Enter M3u Link
Enter The m3u link you received from your IPTV provider in m3u URL field
You must active captcha (I’m not robot)
and click send. Restart your TV and open SET IPTV again , Enjoy thousands TV channels, movies and series .
Step 1: Start by downloading IPTV Smarters app from the App Store or the official website through this URL :
or you can search for it on App store
install the app on your IOS device.
Step 2: Open the app once downloaded and Enter the login details.
Step 3: Enter the login details that we have provided you after you get a subscription with us
Now Click on “ADD USER” to proceed to the next section.
Step 4: Wait some seconds.
Step 5: Now click on “Live TV” icon as depicted in the image via a red arrow.
Step 6: Now you must select the channel group that you want to watch and proceed to the next section.
Step 7: Now you must click on the channel name and then double click on the small screen to turn into full screen as the final step.
Step 8: To add EPG no need to add any EPG url, Just click on “Install EPG” .
1. This is instruction For Enigma 2/ Linux installation, you need install putty to use it.
Settings > Setup > System Network Device > Setup Adapter > Settings
And get your IP address it starts with 192.168….
2. Go to your windows PC and Download Putty Software.
3. Open Putty
4. Add your IP address of your Device.
5. Add Port 23
6. Click on open
7. Your default login and password are root
8. Copy your line ( you will get it after you order your subscription )
wget -O /etc/enigma2/iptv.sh “your m3u link” && chmod 777 /etc/enigma2/iptv.sh && /etc/enigma2/iptv.sh
9. RIGHT CLICK MOUSE BUTTON after you enter your line press ENTER
10. Type reboot and your device will restart.
Plug your MAG device into the power, connect the HDMI cable to the TV and box, connect the LAN cable from the router to the box or WIFI adapter to the box:
Next select and enter the System settings:
Click on Servers:
Choose and Press option ‘Portals’:
You will see ‘Portal 1 name‘ line enter the following: iptvsmartplus.com
Below that you will see ‘Portal 1 URL‘, enter the URL you received in your confirmation email.
Be 100% sure you enter this correctly.:
When you have done all of the above click ‘OK‘ on your remote to save the details.
Now press ‘EXIT‘ 2 times on the remote control and restart the portal.
You should now be ready to watch your Live IPTVSMARTPLUS.COM.
NOTE: If you are using a MAG 250 or MAG 256 and your portal does not load it could be that the channels we have are too many for your device.
Let us know about this and we can deactivate most of the other countries that you would never use.
This will reduce the load on the mentioned devices and allow your system to work.
IPTV MAG Box – Your STB is Blocked:
Should you see a message on your MAG Box once you have restarted the portal that says ‘Your STB is blocked, Call the provider’ don’t worry it is easy to solve.
It normally means that your MAC Address is not yet active or you have supplied an incorrect MAC code when registering with us.
If this is the case please double check the MAC Address underneath the MAG STB and send it to us again so we can add it for you.